Odroid M1S
Compatibility verified by ScreenSoft through real-world testing. Results apply to the tested hardware and software configuration.
Verified compatibility
- Applications: No
- FHD video: Yes
- UHD video: No
Description and specifications from the manufacturer
An ARM single-board computer with a Rockchip RK3566 processor, onboard LPDDR4 memory and eMMC storage.
| Parameter | Value |
|---|---|
| Device type | SBC |
| Processor | Rockchip RK3566; Cortex-A55 |
| Architecture | ARM64 |
| Cores / threads | 4 / 4 |
| Maximum CPU frequency | 1.8 GHz |
| Graphics | Mali-G52 MP2 |
| RAM type | LPDDR4 |
| Memory slots | Soldered memory |
| Maximum RAM capacity | 4 GB (onboard) |
| Installed RAM / variants | 4 GB |
| Storage interfaces | eMMC; microSD; M.2 2280 NVMe PCIe 2.1 ×1 |
| Installed storage / variants | 64 GB eMMC |
| Display outputs | 1× HDMI 2.0; MIPI DSI |
| Manufacturer display-output resolution | 4K / 60 Hz |
| Ethernet | 1× RJ45; 1 Gb/s |
| Wi-Fi | Not onboard; an adapter can be added |
| Bluetooth | Not onboard; an adapter can be added |
| USB | 1× USB 3.0; 1× USB 2.0; 1× micro USB 2.0 OTG |
| Audio | HDMI |
| Other interfaces | 40-pin GPIO; 14-pin GPIO; UART |
| Power supply | USB-C 5 V / 3 A |
| Cooling | Heatsink; a fan can be added |
| Dimensions | 90 × 65 × 16 mm |
Installed RAM and storage depend on the purchased configuration. Maximum capacity does not describe the memory supplied.
Manufacturer specifications describe the hardware. ScreenSoft support is determined by the test results and limitations on this page.
Known limitations
- An additional active cooling fan (3.5 V or 5 V) connected to GPIO is required.
Required components
- Board
- Active fan
- Optional USB Wi-Fi adapter
Manufacturer:
https://www.hardkernel.com/shop/odroid-m1s-with-4gbyte-ram-io-header/Technical documentation
← Back to catalogueDidn't find what you were looking for?
Contact ScreenSoft support at support@screensoft.org
Contact ScreenSoft support at support@screensoft.org