Odroid H4

Compatibility verified by ScreenSoft through real-world testing. Results apply to the tested hardware and software configuration.

Verified compatibility

An x86 single-board computer with an Intel N97 processor and one DDR5 SO-DIMM slot. This is the base H4, rather than the H4+.

Hardware specifications; ScreenSoft support is listed separately.
Parameter	Value
Device type	SBC
Processor	Intel N97
Architecture	x86-64
Cores / threads	4 / 4
Maximum CPU frequency	3.6 GHz
Graphics	Intel UHD Graphics; 24 EU
RAM type	DDR5-4800
Memory slots	1× SO-DIMM
Maximum RAM capacity	48 GB
Installed RAM / variants	Supplied without installed RAM
Storage interfaces	M.2 2280 NVMe PCIe 3.0 ×4; eMMC
Installed storage / variants	Storage is added separately
Display outputs	1× HDMI 2.0 + 2× DisplayPort 1.2
Manufacturer display-output resolution	4K / 60 Hz
Ethernet	1× RJ45; 2.5 Gb/s
Wi-Fi	Not onboard; an adapter can be added
Bluetooth	Not onboard; an adapter can be added
USB	2× USB 3.0; 2× USB 2.0
Audio	3.5 mm; SPDIF; HDMI / DP
Other interfaces	24-pin: UART; I²C; USB 2.0
Power supply	DC 11–20 V
Cooling	Heatsink; a fan can be added
Dimensions	120 × 120 mm

Installed RAM and storage depend on the purchased configuration. Maximum capacity does not describe the memory supplied.

Manufacturer specifications describe the hardware. ScreenSoft support is determined by the test results and limitations on this page.

ScreenSoft requirement: at least 8 GB RAM for FHD; at least 16 GB for UHD and applications.

Manufacturer:

The document covers H4, H4+ and H4 Ultra. The information for the base H4 model applies to this page.

Didn't find what you were looking for?
Contact ScreenSoft support at support@screensoft.org